View SAFC8365MC90T_664020.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CERAMIC MICROWAVE FILTERS SAW FILTERS SAF Series
FEATURES
s s s s Standard part frequency range (80MHz - 2.0GHz) Low passband ripple Linear phase High selectivity
APPLICATIONS
s s s s s s s Cellular Phone: E-AMPS, PCS and GSM, PDC Cordless Phone: CT-1, ISM, DECT Land Mobile Radio (LMR) 915 MHz ISM Pager RKE GPS
PART NUMBERING SYSTEM
SAF C 860.5M A* 7* 0* N - TC
Designates Saw Filters
C - Surface Mount Multi-Layered Ceramic U - Surface Mount Single Layer Ceramic
Center Frequency in MHz
Alpha Character for Design Characteristics
Numeric Package Style Code
Numeric Performance Code
Substrate: T - Lithium Tantalate N - Lithium Niobate X - Crystal S - Sapphire
180mm dia reels: TC = 500/Reel TC11 = 1,000/Reel TC12 = 2,000/Reel 330mm dia reels: TC00 = 10,000/Reel TC05 = 5,000/Reel TC04 = 4,000/Reel TC02 = 2,000/Reel
*Consult Microwave Group for details by part number.
TYPICAL CELLULAR SYSTEM AND SAW POSSIBILITIES
ATTENUATION VS. FREQUENCY - GENERAL COMPARISON OF FILTER CHARACTERISTICS
MIXER
IF ANT SAW LOCAL FILTER VCO LPF DUPLEXER P.S. PLL TCXO
Attenuation
SAW Rx FILTER LNA
SAW IF FILTER
SAW
LC
Dielectric
P.A. SAW Tx FILTER MIXER
90MHz PLL AF Frequency
350
CG01-I
CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series
App. Part Number Function Center Freq. (MHz)
836.5
I.L. (dB) max. *
3.8
Bandwidth (MHz)
824 to 849 869 to 894 920 to 2000 869 to 894 824 to 849 1100 to 2000 869 to 894 824 to 849 1100 to 2000 869 to 894 824 to 849 1100 to 2000 fo 15kHZ 83.04 to 83.10 83.22 to 83.28 fo 15kHZ 83.04 to 83.10 83.22 to 83.28 fo 13kHz 85.26 to 85.32 85.44 to 85.50 fo 630kHz 135.33 139.65 to 140.91 1930 to 1990 1850 to 1910 1719 to 1780 1850 to 1910 1930 to 1990 3860 to 3980 1850 to 1885 1930 to 1965 3700 to 3770 1885 to 1910 1965 to 1990 3770 to 3820 209.75 to 211.01 130 to 209.13 211.63 to 270 890 to 915 935 to 960 890 to 915 935 to 960 1500 to 2000 890 to 915 935 to 960 1500 to 2000 935 to 960 890 to 915 1500 to 2000 935 to 960 890 to 915 1500 to 2000 935 to 960 890 to 915 1200 to 1500 925 to 960 880 to 905 1850 to 2500 925 to 960 980 to 1100 1600 to 2500 1805 to 1880 1600 to 1710 1980 to 3000 925 to 960 880 to 905 1600 to 2000 1805 to 1880 1705 to 1785 2800 to 4000 fo 80kHz 245.6 and 246.4 243 and 249
Attenuation (dB)
3.8 25 32 3.5 30 32 2.5 20 2.3 3.5 30 28 3.0 20 min. 20 min. 3.0 20 min. 20 min. 3 25 25 3 40 45 4.5 15 23 4.5 9 14 2.8 30 20 2.8 30 20 5.0 33 33 4 20 3.5 25 40 3.5 25 25 3.5 35 40 3 20 23 3.8 35 35 3.0 18 30 4.3 23 25 4.5 35 20 3.7 15 25 4.2 7 15 3 25 40
Ripple (dB) VSWR max.
1.8 2
Max. GDT ( s)
N/S
Input/Output Impedance
50 ohm // 0pF
Pkg. Style
SC33
Tape Code
SAFC836.5MC90T
RF (TX)
SAFC881.5MC90T
RF (RX)
881.5
3.5
1.5
2.0
--
50 ohm // 0pF
SAFC881.5MD90T
RF (RX) RF (RX) differential 1st IF
881.5
2.5
1.5
2.5
--
50 ohm // 0pF
E-AMPS SAFC881.5MWC90T /ADC SAFC83.160MA40X
881.5
3.5
1.5
2.0
--
50 ohm // 0pF
TC00, TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 TC00, SC33 TC05, TC11,TC12 TC, TC11 TC, TC11 TC, TC11, TC04 TC, TC11, TC04 TC00, TC05, TC12 TC00, TC05, TC12
83.160
5.0
1.5
N/S
10.0
850 ohm // -2.0pF SC511
SAFC83.160MC40X
1st IF
83.160
5.0
1.5
N/S
8.0
850 ohm // -2.0pF SC511
SAFC85.380ME35X
1st IF
85.38
5.5
1.5
N/S
10
870 ohm // -1.7pF SC59
SAFC130.4MSC10T
1st IF
130.38
5.5
N/S
N/S
0.8
435 ohm // 0.8uH
SC57 SC33 low profile SC33 low profile
SAFC1960ML1C0T
RF (RX)
1960
4.5
3.0
2.5
--
50 ohm // 0pF
SAFC1880ML1C0T
RF (TX)
1880
4.5
3.0
2.5
--
50 ohm // 0pF
PCS
SAFC1867.5T1897.5ML80T
RF split TX
1867.5
2.8
1.8
1.8
--
50 ohm // 0pF
1897.5
2.8
SC44 dual type
TC, TC04 TC11
SAFC210.38MWJSOX
IF differential RF (TX) RF (TX) RF (TX) differential RF (TX)
210.38
8.5
--
1.0
--
in 775 ohm // 68nH SC513 out 465 ohm // 54nH 50 ohm // 0pF 50 ohm // 0pF SC33 SC33
SAFC902.5MA90N SAFC902.5MC90T
902.5 902.5
4 3.5
1.7 1.5
2.5 2.1
N/S N/S
SAFC902.5MWC90T
902.5
3.5
1.5
2.3
--
50 ohm // 0pF
SC33
GSM
SAFC947.5MC90T
947.5
3.5
1.5
2.3
N/S
50 ohm // 0pF
SC33
SAFC947.5MD90T
RF (TX) RF (TX) differential RF (RX)
947.5
3.5
1.5
2.2
--
50 ohm // 0pF
SC33
SAFC947.5MWC90T
947.5
3.8
1.5
2.3
--
50 ohm // 0pF
SC33 SC33 low profile SC33 low profile SC33 low profile SC44 dual type SC44 dual type
SAFC942.5MD1C0T
942.5
3.0
1.7
2.8
--
50 ohm // 0pF
EGSM
SAFC942.5MYJ1C0T RF (RX) 942.5 4.3
2.2
2.8
--
50 ohm // 0pF
SAFC1842.5ML1C0T
RF (RX) RF (RX) EGSM
1842.5
4.5
3.0
2.5
--
50 ohm // 0pF
942.5
3.7
2.5
2.7
--
50 ohm // 0pF
GSM 1800
SAFC942.5T1842.5ML80T RF (RX) GSM1800 SAFC246.000MC30X 1st IF 1842.5 4.2
2.5
2.7
--
50 ohm // 0pF
246
5
1.0
N/S
2.5
420 ohm // -3.6pF SC59
TC02, TC11 TC00, TC05 TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12 TC00, TC05, TC12 TC00, TC05, TC12 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11
CERAMIC MICROWAVE FILTERS
N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
CG01-I
351
CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series
Type Part Number Function
TX or RX TX or RX RF
Center Freq. (MHz)
903
I.L. (dB) max. *
4.5
Bandwidth (MHz)
902 to 904 926 to 928 944 to 948 926 to 928 902 to 904 968 to 972 902 to 928 790 to 860 970 to 1040 fo 576MHz fo 1.15MHz fo 1.728MHz 806 to 825 761 to 780 851 to 870 851 to 870 806 to 825 896 to 915 314.7 to 315.3 293 to 293.9 357.5 to 358.7 868 to 870 825 to 828 910 to 913 863 to 865 820 to 823 905 to 908 433.05 to 434.7 389 to 392 475.5 to 478.5 1574 to 1577 1382 to 1397 1478 to 1487 90 1MHz 84 to 85 95 to 96 940 to 960 810 to 830 1050 to 2000 940 to 960 810 to 830 1050 to 2000 810 to 830 940 to 960 1100 to 2000 810 to 830 940 to 960 1100 to 2000 1429 to 1453 1477 to 1501 1783 to 1808 1477 to 1501 1429 to 1453 1737 to 1761 1477 to 1501 1429 to 1453 1735 to 1766 893 to 898 810 to 830 1778 to 1796 925 to 960 870 to 885 1850 to 1920 810 to 843 893 to 960 1300 to 2000 870 to 885 925 to 960 1300 to 2000 130 16kHz 130 100kHz 130 200kHz
Attenuation (dB)
4.5 35 40 4.5 35 40 4.5 max. 30 min. 20 min. 3.0 10 min. 30 min. 4.0 max. 20 min. 20 min. 4.0 max. 20 min. 15 min. 3.0 50 50 4.5 40 40 4.5 40 40 4.5 50 50 2.8 35 25 3.0 25 25 4 45 35 3.5 48 35 2.5 32 22 2.2 30 22 2.7 15 32 2 15 35 2.7 15 35 4.0 22 20 3.5 18 10 2.7 24 12 2.7 26 23 3.0 22 40
Ripple (dB) VSWR max.
1.5 --
Max. GDT ( s)
--
Input/Output Impedance
50 ohm // 0pF
Pkg. Style
SC33
Tape Code
SAFC903MF90T
ISM 915
SAFC927MF90T
927
4.5
1.5
--
--
50 ohm // 0pF
SAFC915MA70N
915.0
4.5
2.0
N/S
N/S
50 ohm // 0pF
TC00, TC05, TC11, TC12 TC00, SC33 TC05, TC11, TC12 TC00, SC44 TC04, TC11 SU511 TC, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC00, TC05, TC12 TC, TC04, TC11 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00 TC05 TC11. TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC12
DECT
SAFU110.6MSA40T
1st IF
110.592
4.5
N/S
N/S
0.7
300 ohm 1.2 H
SAFC815.5MA70N
RF
815.5
4.0
2.0
2.5
N/S
50 ohm // 0pF
SC44
LMR
SAFC860.5MA70N RF 860.5 4.0
2.0
2.5
N/S
50 ohm // 0pF
SC44
SAFC315MF70T
RF (RX)
315
3.0
1.5
2.0
--
50 ohm // 0pF
SC44
SAFC869MF70T
RF (RX)
869
4.5
1.5
--
--
50 ohm // 0pF
SC44
RKE
SAFC864MF70T RF (RX) 864 4.5
1.5
--
--
50 ohm // 0pF
SC44
SAFC434MC70T
RF (RX)
433.9
4.5
1.5
2.0
--
50 ohm // 0pF
SC44 SC33 low profile
SAFC1575MB1C0S
RF (RX)
1575.5
2.8
1.3
3.0
N/S
50 ohm // 0pF
GPS
SAFC90MA31N IF RF (TX) 800 RF (TX) RF (RX) 800 RF (RX) RF (TX) RF (RX) RX RF (TX) 895.5 SAFC895.5T942.5MF1D0T RF(TX) 942.5 RF (TX) 826.5 SAFC826.5T877.5MF1D0T RF (TX) 877.5 877.5 2.7 90 6.5
2.0
--
0.5
365 ohm // -0.7pF SC59
SAFC950MB90N SAFC950MC90T
950 950 820 820 1441 1489 1489
4 3.5 2.5 2.2 2.7 2 2.7
2 1.5 1.5 1.3 1.5 1.2 1.5
N/S 2.5 N/S 2.5 2.3 N/S 2.3
2.5 -- 2.5 -- -- 2.7 --
50 ohm // 0pF 50 ohm // 0pF 50 ohm // 0pF 50 ohm // 0pF 50 ohm // 0pF 50 ohm // 0pF 50 ohm // 0pF
SC33 SC33 SC33 SC33 SC22 SC33 SS22
PDC 800
SAFC820ME90N SAFC820MD90T SAFS1441MC1B0T
PDC 1.5
SAFC1489MC90S SAFC1489MC1B0T
895.5
4.0
2.1
2.5
--
50 ohm // 0pF SC33 dual type TC00, TC05, TC12
PDC Multiband
942.5
3.5
2.3
3.2
--
50 ohm // 0pF
826.5
2.7
1.6
2.6
--
50 ohm // 0pF SC33 dual type TC00, TC05, TC12 TC05, TC11
1.3
2.6
--
50 ohm // 0pF
PDC All
SAFC130.000MA1G0X
IF
130.0
5.5
0.5
--
5
740 ohm // -1.1pF SC36
N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
352
CG01-I
CERAMIC MICROWAVE FILTERS SAW FILTERS SPECIFICATIONS SAF Series
Type Part Number Function Center Freq. (MHz)
906
I.L. (dB) max. *
4.5
Bandwidth (MHz)
887 to 925 832 to 870 2661 to 2775 832 to 870 887 to 925 1000 to 2000 1750 to 1780 1840 to 1870 3500 to 3560 1840 to 1870 1750 to 1780 2300 to 4000 884 to 888 840 to 846 929 to 933 884 to 891 913 to 915 891 to 894 934 to 937 958 to 960 936 to 939 979 to 982 1574 to 1577 1382 to 1397 1478 to 1487 90 1MHz 84 to 85 95 to 96 940 to 960 810 to 830 1050 to 2000 940 to 960 810 to 830 1050 to 2000 810 to 830 940 to 960 1100 to 2000 275 to 285 180 to 242.5 317.5 to 380 276 to 286 181 to 243.5 318.5 to 381 280 to 288 184 to 246.5 321.5 to 384 928.8 to 932.2 884.8 to 890.2 906.8 to 911.2
Attenuation (dB)
4.5 30 20 4.5 22 20 3.5 30 25 3.5 23 20 3.5 max. 40 min. 3.5 max. 40 min. 3.5 max. 30 min. 15 min. 3.5 max. 30 min. 20 min. 2.8 35 25 3.0 25 25 45 45 35 3.5 48 35 2.5 32 22 4.5 max. 48 min. 40 min. 4.5 max. 48 min. 40 min. 4.5 max. 48 min. 40 min. 4.5 max. 45 min. 30 min.
Ripple (dB) VSWR max.
2.8 2.8
Max. GDT ( s)
--
Input/Output Impedance
50 ohm // 0pF
Pkg. Style
SC33
Tape Code
TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC00, TC05, TC11, TC12 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC, TC04, TC11 TC00, TC05, TC12 TC, TC04, TC11 TC12 TC00, TC05, TC11, TC12 TC12 TC, TC04 TC11 TC, TC04 TC11 TC, TC04 TC11 TC, TC04 TC11
SAFC906ML90T
RF (TX)
JAPAN CDMA
SAFC851ML90T RF (RX) 851 4.5
3.0
2.8
--
50 ohm // 0pF
SC33
SAFC1765MF90T
RF (TX)
1765
3.5
2.0
2.4
--
50 ohm // 0pF
SC33
KOREA PCS
SAFC1855MF90T SAFC886ME70T SAFC931ME70T RF (RX) RF RF RF 1885 886.0 931.0 914.0 3.5 3.5 3.5 3.5
2.0 1.5 1.5 1.5
2.4 N/S N/S N/S
-- N/S N/S N/S
50 ohm // 0pF 50 ohm // 10nH 50 ohm // 10nH 50 ohm // 10nH
SC33 SC44 SC44 SC44
CT-1
SAFC914ME70T
SAFC959ME70T
RF
959.0
3.5
1.5
N/S
N/S
50 ohm // 10nH
SC44 SC33 low profile
SAFC139MC70N
RF (RX)
1575.5
2.8
1.3
3.0
N/S
50 ohm // 0pF
SAFC146MC70N
IF RF (TX) 800 RF (TX) RF (RX) 800
90
6.5
2.0
--
0.5
365 ohm // -0.7pF SC59
SAFC154MC70N
950
4
2
N/S
2.5
50 ohm // 0pF
SC33
SAFC162MC70N
950
3.5
1.5
2.5
--
50 ohm // 0pF
SC33
PAGER
SAFC171MC70N 820 2.5
1.5
N/S
2.5
50 ohm // 0pF
SC33
SAFC280ME70N
RF
280.0
4.5
2.0
N/S
N/S
230 ohm // -.2pF
SC44
SAFC281ME70N
RF
281.0
4.5
2.0
N/S
N/S
230 ohm // -.2pF
SC44
SAFC284ME75N
RF
284.0
4.5
2.0
N/S
N/S
230 ohm // -.2pF
SC44
CERAMIC MICROWAVE FILTERS
SAFC930.5ME70T
RF
930.5
4.5
2.0
N/S
N/S
50 ohm // 10nH
SC44
N/S: Not Specified. Tape codes and package quantities defined at the end of the SAW section of this catalog. *IL for IF filters is guaranteed at center frequency relative to 0dB reference. I.L. for RF filters is guaranted across the pass band relative to 0dB reference level. **Attenuation for IF filters is relative to center frequency loss. Attenuation for RF filters is relative to 0dB reference level.
CG01-I
353
CERAMIC MICROWAVE FILTERS SAW FILTERS ENVIRONMENTAL SPECIFICATIONS
MECHANICAL
TEST ITEM PACKAGE
SMD Terminal Strength LEADED
SAF Series
TEST CONDITIONS TEST METHOD
Filter is soldered onto the center of PCB which is laid on two small supporters spaced 90mm apart. The PCB is deflected to 1mm below the horizontal level by the pressing stick for 1 second and repeated 5 times. A force of 1.0 Kg shall be applied to each terminal in the direction of the axis of terminal for 30 5 seconds. A force of 250 gf is applied to each lead in axial direction. The lead shall be bent 90 degrees to one direction, then in opposite direction and returned to the original position. Lead terminals are immersed in methanol with 7 to 10% of rosin flux for about 5 seconds, then immersed in soldering bath at 230 5C for 5 0.5 seconds. Drop 3 times on concrete floor from 1.0 meter, (30cm for some products). Vibration amplitude of 1.5mm at 10-55Hz in each of three mutually perpendicular directions for 1 hour. MIL-STD-201E Method 201A MIL-STD-202E Method 208C
Solderability Random Drop Vibration
BOTH BOTH BOTH
ENVIRONMENTAL
TEST ITEM
Salt Spray Temperature Cycling Humidity Operating Humidity Thermal Shock Life Test (High) Life Test (Low) Operating Life Test Sulfuration
PACKAGE
BOTH BOTH BOTH BOTH BOTH BOTH BOTH BOTH BOTH SMD
TEST CONDITIONS
Hold in chamber with 5% salt density at 35C +1.1/-1.7C for 48 hours. Measure after exposure to room condition for 1 hour. Exposure to 5 cycles of -55C (30 minutes) +25C (15 minutes), 85C (30 minutes) +25C (15 minutes). Test after 2 hours exposure to room conditions. Hold in chamber with 90 to 95% R.H. at 40 2C for 100 hours. Test after 2 hours exposure to room conditions. Hold in chamber with 90 to 95% R.H. at 40 2C for 100 hours at 6VDC. Test after 2 hours exposure to room conditions. Expose to 5 cycles of -55C (30 minutes) +85C (30 minutes). Test after 2 hours exposure to room conditions. Hold in chamber at 85 2C for 100 hours. Test after exposure to room conditions for 2 hours. Hold in chamber at -30 2C for 100 hours. Test after exposure to room conditions for 2 hours. Hold in chamber at 85 2C for 100 hours at 6VDC. Test after exposure to room conditions for 2 hours. Hold in chamber with 1000ppm sulfur density for 24 hours. Test after exposure to room conditions for 2 hours. Filter shall be preheated at 150 20C for 60 seconds, immersed whole electrode in soldering bath at 240 5C for 3 1 seconds, then measured after exposure to room conditions for 2 hours. Lead terminals are immersed up to 1.5mm from package base in soldering bath at 260 5C for 10 1 seconds, then measured after exposure to room conditions for 2 hours.
TEST METHOD
MIL-STD-202E Method 101D MIL-STD-202E Method 102A MIL-STD-202E Method 103B MIL-STD-202E MIL-STD-202E Method 107D MIL-STD-202E Method 108A MIL-STD-202E Method 108A
Resistance to Soldering Heat LEADED
MIL-STD-202E Method 210A
ELECTRICAL
TEST ITEM
Dielectric Withstanding Voltage Insulation Resistance Temperature Characteristics
PACKAGE
BOTH BOTH SMD LEADED
TEST CONDITIONS
Apply 100VDC between I/O terminals and ground terminal, for 1 minute. Apply 100VDC between I/O terminals and ground terminal, for 1 minute. Filter shall be measured between -10C to +60C temperature range. Filter shall be measured between -10C to +50C temperature range.
TEST METHOD
MIL-STD-202E MIL-STD-202E Method 302
354
CG01-I

▲Up To Search▲

Price & Availability of SAFC8365MC90T

	To Download SAFC8365MC90T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .